CNC Straight Bevel Gear Generator YK2350

description1
Zipper closure 1/4 zip athletic pullovers for men. Stretchy, lightweight, fast-drying fabric for superior performance. REGULAR FIT - US standard sizes. An athletic fit that sits close to the body for a wide range of motion, designed for optimal performance and all day comfort. FEATURES - Quarter zip closure;Thumbholes on long sleeves to keep them in place during workout
FEATURES

Features

  • This is a 4-axis CNC machine: the cradle roll (X-axis), the workpiece rotation (Y-axis), the sliding base feed (Z-axis) and the reciprocating movements of the cutter (S-axis).
  • The machine cuts gears with the Generating Principle, of which the gear being cut makes relative rolls repeatedly together with the imaginary generating gear (represented by the reciprocating movements of the cutter).
  • The cutter head, the critical part of the machine, is mounted on the cradle and the gear being cut is mounted on the spindle. The indexing box is located on the sliding base, and the cradle and the sliding base are fixed on the machine bed.
  • Two cutters with linear cutting edges are mounted on the cutter head and make reciprocating linear movements together with the cutter head.
  • A connecting rod mechanism is adopted on the cutter head, which is driven by means of a variable-frequency motor to make the reciprocating movements of the cutter.
  • High-precision worm and worm wheel pairs are used for both the cradle spindle and the indexing box spindle, which are driven by means of servo motors.
  • A ball lead screw, driven by a servo motor, is used for the feed movement of the sliding base.
  • A SIEMENS 828D CNC control system is equipped for the machine.
  • A beautiful, safe and suitable full-enclosure, with good visibility and anti-oil splash, is equipped on the machine. The machine has an automatic chip conveyor.
  • An independent and sealed electrical cabinet with an air conditioner is equipped for the machine.
  • The accuracy of straight bevel gears machined on this machine may reach Grade 7 of the GB Standard.

Application

This machine is designed for cutting straight bevel gears used in the general-purpose machine building industry.
SPECIFICATIONS

Max. diameter of work

500mm

Max. module of work

10mm

Max. cone distance of work

250mm

Max. tooth length

85m

Root angle

80°

Extreme ratio, at 90°shaft angle

1:8

Number of teeth

10—200

Minimum teeth number at 1:1 ratio and α=20 degree

15

Max. adjusting angle of cutter head

Distance between end of work head spindle and machine center

70—380mm

Number of strokes of cutter (15 steps)

98—500

Time for cutting one tooth (11 steps)

16.1—100s


Sliding base setting: above machine center
Below machine center



40mm
100mm



Max. cradle roll: above zero scale
Below zero scale



30°
30°


Taper of work spindle hole

1:20

Diameter of taper hole at large end

100mm

Diameter of through hole

78mm

Power of main motor

3kw

Speed of main motor

800—1300rpm

Total power of machine

20KVA

Overall dimensions (L x W x H)

2400x1800x1800mm

Machine weight

8t

CONTACT US